1. Introduction

HP series hearing aid programmer and the USB interface of PC computer constitute a complete HP system.After set up HP system,you can read and write the data of hearing aid through the hearing aid software that provide by ICLEAR.

2. Technical specifications

PC computer
USB communication: SB 2.0  full speed(USB 1.1 compatible)
HP equipment
Voltage rating: 3.8V - 9V
Maximum current consumption: <500 mA(2.5W)
Minimum current consumption: <500μA(2.5mW)
Rated output
Fixed battery supply(PIN1),left,right side
1.35V,10/50 Ma(Rated current control fitting software)
Programmable battery power supply (PIN5), common for the left and    the right
 -3.50V to ±3.50V,30 mA(Voltage control fitting software)
Work environment
Temperature :+5ºC to + 40ºC
Relative humidity :30% to 90%,noncondensable
Preheating time :<20 second
Air pressure :600hPa to 1060 hPa
Operate In the temperature below - 20 ºC or above 60 ºC may cause permanent damage
Store:
Temperature -25ºC to +70ºC
Relative humidity : <90%,noncondensable
Air pressure : 500hPa to 1060 hPa
Size and weight
Size(L*W*H)94mm×82 mm×25mm
Net weight :120g ±5%
Standard
Safety and system : GB9706.15-1999
Radiation:GB9706.12-1997
Electromagnetic compatibility:YY0505-2005
Accessories
When receive HP equipment,please check whether the outer packing is complete and whether the accessories are all ready,if not,please contact manufacturer.

Standard configuration of HP equipment