Features: |
All parts of the system are fully controlled and monitored by Microprocessor Technology |
Smoothly and efficiently controlling the emulsifier process with digital frequency tracing technology of handpiece |
Easy operation and user-friendly interface with large TFT touch screen and functional menu. |
Up to 10 sets of parameters preset meet different requirements and simplify the surgery operation |
Auto test checks tubing and handpiece problems (e.g.: block or leakage) |
The peristaltic pump gives complete control of aspiration flow rate as well as freedom from anterior chamber shallowing. |
This way can give stronger suction when working in I/A |
Built-in Vitrectomy and Cautery |
Intelligent Voice Reminder |
Specification:
Ultrasonic Emulsification (U/S) | |
Frequency | 40kHz |
Functional mode | Continuance, Pulse, Linear, Burst |
Emulsifying power Range | 0 ~ 100% |
Pulse | Frequency Range 1 ~ 99Hz |
Linear | Emulsifying power linearly controlled by the footswitch, varies between 0 ~ 100% |
Burst-Stopping Time | 1.5 ~ 0s |
Phaco Emulsifier | |
Burst-Working Time | 5 ~ 100ms |
Maximum Vacuum | 500 mmHg |
Maximum Flux Rate | 40 ml/min |
Irrigation/Aspiration | Peristaltic Pump |
Flux Rate | 0 ~ 40 ml/min |
Reflux Rate | 20 ml/min |
Max Vacuum | 0 ~ 500 mmHg |
VIT (Vitrectomy) | |
Cutting Power Source | Air Pump |
Cutting Frequency | 20 ~ 600/min, step 10/min |
Maximum Vacuum | 500 mmHg |
Maximum Flux Rate | 40 ml/min |
Cautery | |
Maximum Power | 10 W ± 20 % (200Ω) |
Type | Bipolar |
Power preset between | 0 ~ 100% |